Troubleshooting WavLink Extender No Light Issue

Post date:



If you want to make the most out of your WavLink WiFi range extender, all the LEDs on it supposed to be stable green. Yes, a stable green LED on your WavLink extender indicates that you are all set to make the most out of it after performing WavLink WiFi extender setup.

But, what it you don’t see any of the. Well, “WavLink extender no light” issue has become the most common issue that is experienced by every third WavLink extender user today. But, you don’t have to worry! You have stumbled upon the right post. Mark our words. In this article, we are going to provide you the various hacks to fix “WavLink extender no light” issue on the fly. So, let’s start over!

Fixed: WavLink Extender No Light Issue

You Have to Connect the Devices Properly

If you want your WavLink Wifi extender to work smoothly for you, then ensure that you have connected it to your router in a proper way.

Apart from this, if you have used a damaged or worn out Ethernet cable for making a connection between your WavLink WiFi extender, bear in mind, you will surely get to face “WavLink extender no light” issue . So, for fixing it, make sure that a good and well-maintained Ethernet cable is used and the connection made between your WavLink device and router is successful.

Is the connection successfully made? Check by accessing http ap setup page. Once you have access over http ap setup page, configure your WavLink WiFi extender in a proper way. Chances are your device is not properly installed and because of that you are getting “WavLink extender no light” issue.

Check the WiFi Connection

“WavLink extender no light” issue can also persists if your internet connection is not working is a proper way. So, what you have to do, contact your internet service provider not. Just ask him to fix the internet-connectivity issue for you as soon as possible so that you can make the most out of your WavLink WiFi extender. If you don’t find anything wrong from your internet service provider’s end, then without consuming much time, give the next troubleshooting hack a shot.

Update the WavLink Firmware

“WavLink extender no light” issue can also force you bang your head against the wall if the firmware version on your device has become outdated. So, if you want to get the finest ways for fixing the issue, update the firmware of your WavLink WiFi extender right now. For instructions, navigate to firmware update page right after WavLink setup and go through the on-screen prompts.

If you want to prevent major issues with your WavLink extender, do not ever commit the mistake of interrupting the WavLink extender firmware update process.

Relocate Your WavLink Extender

Yes! You read it absolutely correct! The bad location of your WavLink WiFi range extender can also force you experience “WavLink extender no light” issue. The best way to deal with such kind of annoying issue is to place your WavLink WiFi extender at the center-most and higher location in your home, near to your host router.

While selecting a new place for your WavLink WiFi extender, ensure – not to choose congested or lower surface like cabinet, under a table, behind curtains, etc.

Configure WavLink Extender In a Proper Way

Bear in mind, improper configuration of your WavLink WiFi range extender is one of the major yet biggest reasons behind getting “WavLink extender no light” issue. For fixing it, we suggest you reset your WavLink WiFi range extender back to factory default values and reconfigure tit from scratch. To perform the reset process, just press and hold the reset button on your WavLink WiFi extender, hold it for some time, and then, release it.

After successfully resetting your WavLink WiFi extender, reconfigure it properly via setup Make sure to configure the extender in a correct manner this time. Else, you may get indulge with many major issues apart from “WavLink extender no light” issue.

The Last Words

Our article on how to troubleshoot “WavLink extender no light” issue comes to end. We really hope for the best that the above-mentioned hacks provided here were helpful. Which fix proved helpful to you?

Good luck! And, we really wish Merry Christmas and a Happy New Year to you and your family!

[td_block_social_counter style="style10 td-social-boxed td-social-colored" facebook="tagdiv" youtube="tagdiv" twitter="tagdivofficial" googleplus="+tagDivthemes" custom_title="STAY CONNECTED" block_template_id="td_block_template_9"]